JVC KD-AR8500 Troubleshooting, Causes, Symptoms, Remedies

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

	Symptoms	Causes	Remedies
	• Sound cannot be heard	The volume level is set to the	Adjust it to the optimum
	from the speakers.	minimum level.	level.
		Connections are incorrect.	Check the cords and
			connections.
	• The receiver does not work	The built-in microcomputer	Reset the receiver (see page
General	at all.	may have functioned	2).
	• “Connect Error” appears on	The control panel is not	Remove the control panel,
		incorrectly due to noise, etc.
	the display.	attached correctly.	wipe the connector, then
			attach it again (see pages 42
			and 49).
	• “Push Reset” appears on	Something is blocking the	Reset the receiver (see page
	the display and the control	control panel movement.	2). If this does not work,
	panel movement is freezed.		check the installation.
FM/AM	• SSM automatic presetting	Signals are too weak.	Store stations manually.
	does not work.
	• Static noise while listening	The antenna is not connected	Connect the antenna firmly.
	to the radio.	firmly.
	• CD-R/CD-RW cannot be	CD-R/CD-RW is not	• Insert a finalized CD-R/
	played back.	finalized.	CD-RW.
	• Tracks on the CD-R/		• Finalize the CD-R/CD-RW
	CD-RW cannot be skipped.		with the component which
			you used for recording.
playback	• Disc cannot be ejected.	Disc is locked.	Unlock the disc (see page 19).
	• Disc cannot be recognized	The CD player may have	Eject the disc forcibly (see
	(“No Disc,” “Loading	functioned incorrectly.	page 4).
Disc	Error,” or “Eject Error”
	appears).
	• Disc sound is sometimes	You are driving on rough	Stop playback while driving
	interrupted.	roads.	on rough roads.
		Disc is scratched.	Change the disc.
		Connections are incorrect.	Check the cords and
			connections.

54