Sound adjustments

ENGLISH

 

 

 

 

 

You can adjust the sound characteristics to your

 

 

 

 

Adjusting the sound

 

preference.

 

 

 

• When

appears on the display, you can

 

 

move back to the previous display by pressing

 

 

number button 3.

 

1

 

 

 

 

2

 

 

 

 

 

 

 

•For “EQ” setting, see the following.

3Adjust the selected setting item.

AFad/Bal (Fader/Balance)

1 Press number button 1 () to move to the “Fad/Bal” adjustment display.

2 Adjust the speaker output balance by pressing:

5/ ∞: between the front and rear speakers. [F06 to R06]

4/¢ :

between the left and right speakers. [L06 to R06]

BSubwoofer

1 Press number button 1 () to move to the “Subwoofer” adjustment display.

2Use 4/¢ to select a cutoff frequency to the subwoofer.

•80Hz: Frequencies higher than 80 Hz are cut off.

•120Hz: Frequencies higher than 120 Hz are cut off.

•160Hz: Frequencies higher than 160 Hz are cut off.

3Turn the control dial to adjust the subwoofer output level. [0 to 8]

CVolAdjust

Turn the control dial to adjust the input level of each source (except FM).

[–5 to +5]

Adjust to match the input level of the FM sound level.

•Before making an adjustment, select a source you want to adjust.

DLoudness

Turn the control dial to activate or deactivate the loudness to produce a well-balanced sound at low volume levels. [Off or On]

4Exit from the setting.

Selecting preset sound modes (i-EQ: intelligent equalizer)

You can select a preset sound mode suitable to the music genre.

Available sound modes

FLAT (No sound mode is applied), H.ROCK (Hard rock), R & B (Rhythm & blues),

POP, JAZZ, DANCE, COUNTRY, REGGAE, CLASSIC, USER 1, USER 2, USER 3

16