Sampling frequency:

MP3: 48 kHz, 44.1 kHz, 32 kHz (MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (MPEG-2) 12 kHz, 11.025 kHz, 8 kHz (MPEG-2.5)

WMA: 8 kHz — 48 kHz

This unit can play back MP3 files recorded in VBR (variable bit rate).

The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/WMA tag information.

This unit can recognize a total of 2 500 files and 250 folders (999 files per folder).

Image Link

Image Link will not work in the following cases:

If no <jtw> file is included in an MP3/ WMA folder.

If Intro play is activated.

If the source is changed to another from “CD.”

If more than one <jtw> file are included in a folder, a file with the youngest file number is used for Image Link.

Ejecting a disc

If the ejected disc is not removed within

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not be played this time.)

Sound adjustment

General

If you are using a two-speaker system, set the fader level to the center (“00”).

Subwoofer out setting takes effect only when a subwoofer is connected.

You cannot change the input level— “VolAdjust” of the FM stations. If you try to adjust it for FM, “Fix” will appear.

Graphic display

General

You can display two sizes of pictures and animations.

LARGE: <jtl> for still pictures and <jta> for the animations;

The image is displayed with the dimension of the screen.

SMALL: <jtm> for still pictures and <jtb> for animations;

The image is displayed like a CD jacket (on the left side of the display).

Depending on a downloaded file, it may take longer time to show it on the display.

Downloading (or deleting) files

You can download a file only while selecting “CD” for the playback source; on the other hand, you can delete a file while selecting any source.

After finishing the procedure to download a file, playback starts from the beginning.

If you have already downloaded an animation, downloading a new animation deletes the previously stored animation.

It takes a long time to download an animation.

About 3 to 4 seconds for a still image (one frame).

About 1 to 2 minutes for an animation of 30 frames.

About 3 minutes for an animation of 60 frames.

If you try to operate the downloading procedure from a disc without any <jtl>, <jtm>, <jta>, and <jtb> files, beeps sound.

If you try to store more than 30 images for each size “LARGE” and “SMALL,” “Picture Full” appears and you cannot start downloading. Delete unwanted files before downloading.

If the total frame number of an animation downloaded exceeds 60, the frames exceeding that number are ignored.

ENGLISH

Continued on next page...

37