JVC KD-AVX77 F06, L06, –12, +12, –06, R06;, R06;, +08;, ♦ Off, Fader:, Balance:, ♦ Through, Crossover, ♦ Off, On, Fader/Balance, Subwoofer Level, Rear Speaker *3

ENGLISH

Initial: Underlined

Menu item			Selectable setting/item
Fader/Balance
Fader:				Dragging also makes
Adjust the front and rear				adjustments.
speaker output balance.
Balance:
	♦ F06 to R06; Initial 00 (fader)
Adjust the left and right
speaker output balance.	♦ L06 to R06; Initial 00 (balance)
	[5/∞]: Adjusts fader.
	[2/3]: Adjusts balance.
	[	]: Resets the adjustments.
	• When using a two-speaker system, set the fader to the center (00).
Volume Adjust *1	Adjust and store the auto-adjustment volume level for each source, comparing
	to the FM volume level. The volume level will automatically increase or decrease
	when you change the source.
	• <Fix> appears when an FM broadcast is selected as the source.
	♦ –12to +12; Initial 00
Subwoofer Level	You can adjust the output level of the subwoofer when it is activated.(				17)
	♦ –06to +08; Initial 00
High Pass Filter	♦ Through		: Select when the subwoofer is not connected.
	♦ On		: Select when the subwoofer is connected.
Crossover	Select the crossover frequency between the front/rear speakers and the
	subwoofer.

♦80Hz, 120Hz, 150Hz

Amplifier Gain *2		You can change the maximum volume level of this unit.
		♦ Off	: Deactivates the built-in amplifier.
		♦ Low Power : VOL 00 to 30 (Select this if the maximum power of the
			speakers is less than 50 W.)
		♦ High Power	: VOL 00 to 50
Rear Speaker *3		You can activate/deactivate the rear speakers.
		♦ Off, On
*1	For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital and
	the others.
*2	The volume level automatically changes to “30” if you change to <Low Power> with the volume level set higher
	than “30.”
*3	This setting takes effect only when Dual Zone is activated. (			41)

24