JVC KD-AVX77 USB, Symptom, Bluetooth, Remedy/Cause, MPEG1/MPEG2/MP3/WMA/WAV/AAC

MPEG1/MPEG2/MP3/WMA/WAV/AAC

USB

Bluetooth

Symptom	Remedy/Cause
• Disc cannot be played back.	• Change the disc.
	• Record the tracks using a compliant application on the
	appropriate discs. (	4)
	• Add appropriate extension codes to the file names.
• Noise is generated.	The track played back is not a playable file format. Skip to another
	file.
• Tracks are not played back as you	Playback order may differ from the one played back using other
have intended them to play.	players.
• Elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by how the
	tracks are recorded.
• “Not Support” appears on the screen	The track is unplayable.
and track skips.
• Noise is generated.	The track played back is not a playable file format. Skip to another
	file.
• Tracks cannot play back as you have	Playback order may differ from the one played back using other
intended them to play.	players.
• “Now Reading...” keeps flashing on	• Readout time varies depending on the USB device.
the screen.	• Do not use too many hierarchy and folders.
	• Turn off the power and on again.
• Correct characters are not displayed	For available characters,	62.
(e.g. album name).
• While playing a track, sound is	The tracks are not properly copied into the USB device. Copy
sometimes interrupted.	tracks again, and try again.
• Bluetooth device does not detect the	• Search from the Bluetooth device again.
unit.	• Reset the unit. While “Open...” is shown on the screen, search
	from the Bluetooth device again.
• The unit does not make pairing with	• Enter the same PIN code for both the unit and target device. If
the Bluetooth device.	the PIN code of the device is not indicated on its instructions,
	try “0000” or “1234.”
• Echo or noise occurs.	Adjust the microphone position.

ENGLISH

Continued on the next page

REFERENCES 67