For MPEG1/MPEG2/JPEG/MP3/WMA/WAV/AAC, track is searched within the same folder.

For DVD-VR, program/playlist search is possible during Original program playback (PG)/Playlist playback (PL).

To erase a misentry, press CLR (clear) while holding

SHIFT.

Using menu driven featuresDVD Video

1Press TOP M/MENU to enter the menu screen.

2 Press %//@/# to select an item you want to start play.

3 Press ENT (enter) to confirm.

DVD-VR

1Press TOP M to enter the Original Program. Press MENU to enter the Playlist.

2Press %//@/# to select an item you want to start play.

3Press ENT (enter) to confirm.

Original Program/Playlist screen, 58.

VCD

1While holding SHIFT, press DIRECT to enter the search mode.

2While holding SHIFT, press the number buttons (0

– 9) to enter the desired number.

3Press ENT (enter) to confirm.

• To return to the previous screen, press RETURN.

Canceling the PBC playback (VCD)

1Press , then press DIRECT while holding SHIFT.

2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.

3 Press ENT (enter) to confirm.

• To resume PBC, press TOP M/MENU.

Operations using the on-screen bar

(DVD-Video/DVD-VR/MPEG1/MPEG2/JPEG/ VCD)

These operations are possible on the monitor using the remote controller.

1Show the on-screen bar. ( 40)

(twice)

The on-screen bar is not displayed fully under some <Aspect> settings. (15)

2Select an item.3Make a selection.

If pop-up menu appears...

To cancel pop-up menu, press RETURN.

For entering time/numbers, see the following.

Entering time/numbers

Press %/to change the number, then press @/# to move to the next entry.

Each time you press %/, the number increases/ decreases by one value.

After entering the numbers, press ENT (enter).

It is not required to enter the zero and tailing zeros (the last two digits in the example below).

Ex.: Time search

DVD: _:_ _:_ _ (Ex.: 1:02:00)

Press % once, then # twice to go to the third entry, % twice, then press ENT (enter).

Removing the on-screen bar

ENGLISH

OPERATIONS 39