6Use the Bluetooth device to search and connect.
On the device to be connected, enter the same PIN code you have just entered for this unit. “Connected (and device name)” appears on the display.
Now connection is established and you can use the device through the unit.
The device remains registered even after you disconnect the device. Use “Connect“ (or activate “Auto Connect”) to connect the same device from next time. (See the right column and page 36.)
Connecting a special device
Perform steps 1 – 3 on page 14, then...
1Select “Special Device.”
The unit displays the list of the preset devices.
2Select a device you want to connect.
3Use “Open” or “Search” to connect.
ENGLISH
Searching for available devices
Perform steps 1 – 3 on page 14, then...
1Select “Search.”
The unit searches and displays the list of the available devices.
•If no available device is detected, “Device not found” appears.
2Select a device you want to connect.
3Enter the specific PIN code of the device to the unit.
•Refer to the instructions supplied with the device to check the PIN code.
4Use the Bluetooth device to connect.
Now connection is established and you can use the device through the unit.
Connecting/disconnecting a registered device
1Select “Bluetooth Phone” or “Bluetooth Audio.”
2Select a registered device you want to connect/disconnect.
3Enter setting menu.
4Select “Connect” or “Disconnect” to connect/ disconnect the selected device.
You can set the unit to connect a Bluetooth device automatically when the unit is turned on. (See “Auto Connect” on page 36.)
Continued on the next page
OPERATIONS 15