JVC KD-BT1 1Follow steps 1 to 3 on page, 3Select a source, 3Select a primary color, 4Select a color, Exit from the setting, Exit from the setting, 6Exit from the setting

Changing the display color

You can select your favorite display color for each source (or all sources).

•When appears on the display, you can move back to the previous display by pressing number button 3.

Setting the display color

1Follow steps 1 to 3 on page 31.

•In step 2, select “COLOR.”

•In step 3, select “Color Sel.”

2

3Select a source.

All Source*1 ÔCD ÔChanger (or Ext In*2)

ÔUSB*3 ÔFM ÔAM ÔSIRIUS*3/XM*3

ÔiPod*3/D.PLAYER*3 ÔBT Phone Ô BT Audio Ô(back to the beginning)

*1 When you select “All Source,” you can use the same color for all the sources.

*2 Depends on the “Ext Input” setting, see page 34. *3 Displayed only when the target component is

connected.

*5 The user-edited colors—“Day Color” and “NightColor” will be applied (see below for details).

5Repeat steps 3 and 4 to select the color for each source (except when selecting “All Source” in step 3).

6Exit from the setting.

Creating your own color—User Color

You can create your own colors—“Day Color” or “NightColor.”

1Follow steps 1 to 3 on page 31.

•In step 2, select “COLOR.”

•In step 3, select “Color Set.”

2Select “Day Color” or “NightColor.”

3Select a primary color.

ENGLISH

4Select a color.

Every*4 ÔAqua ÔSky ÔSea ÔLeaves ÔGrass ÔApple ÔRose ÔAmber Ô Honey ÔViolet ÔGrape ÔPale Ô User*5 Ô(back to the beginning)

*4 The color changes every 2 seconds.

4Adjust the level (+00 to +11) of the selected primary color.

5Repeat steps 3 and 4 to adjust other primary colors.

6Exit from the setting.

SETTINGS 35