Symptom | Remedy/Cause |
• Bluetooth device does not detect the unit. | The unit can be connected with one Bluetooth cellular |
| phone and one Bluetooth audio device at a time. |
| While connecting a device, this unit cannot be detected |
| from another device. Disconnect currently connected |
| device and search again. |
|
|
•The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device.
•Search from the Bluetooth device. After the device detects the unit, select “Open...” on the unit to connect the device. (See page 14.)
• The unit does not make pairing with the | • Enter the same PIN code for both the unit and target |
Bluetooth device. | device. If the PIN code of the device is not indicated on |
| its instructions, try “0000” or “1234.” |
| • Select the device name from “Special Device,” then try to |
| connect again. (See page 15.) |
| • Try to pair/connect from the Bluetooth device. |
| • Check if your Bluetooth device support the respective |
| profile. (See page 13.) |
|
|
• Echo or noise occurs. | Adjust the microphone unit position. |
• Phone sound quality is poor. | • Reduce the distance between the unit and the Bluetooth |
| audio device. |
| • Move the car to a place where you can get a better signal |
| reception. |
• The sound is interrupted or skipped during | • Reduce the distance between the unit and the Bluetooth |
playback of a Bluetooth audio device. | audio device. |
| • Disconnect the device connected for “Bluetooth Phone.” |
| • Turn off, then turn on the unit. |
| • (When the sound is not yet restored,) connect the device |
| again. |
|
|
• The connected audio device cannot be | Check whether the connected audio device supports AVRCP |
controlled. | (Audio Video Remote Control Profile). |
ENGLISH
Continued on the next page
REFERENCES 45