Adjusting the sound 
ENGLISH | You can adjust the sound characteristics to your | |
preference. |
| |
|
| |
| • When | appears on the display, you can move |
| back to the previous display by pressing number | |
| button 3. |
|
1 
2 
• For “EQ” setting, see the following.
3Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 (
) to move
to the “Fad/Bal” adjustment display.
2Adjust the speaker output balance by pressing:
5/ ∞: between the front and rear speakers. [F06 to R06]
4/¢
: between the left and
right speakers. [L06 to R06]
BSubwoofer
1 Press number button 1 (
) to move to the “Subwoofer” adjustment display.
2 Use
4/¢
to select a cutoff frequency to the subwoofer.
•80Hz: Frequencies higher than 80 Hz are cut off.
•120Hz: Frequencies higher than 120 Hz are cut off.
•160Hz: Frequencies higher than 160 Hz are cut off.
3Turn the control dial to adjust the subwoofer output level. [0 to 8]
CVolAdjust, [–5 to +5]
Turn the control dial to adjust the input level of each source (except FM).
Adjust to match the input level of the FM sound level.
• Before making an adjustment, select a source you want to adjust.
DLoudness, [Off or On]
Turn the control dial to select “Off” or “On.” When “On” is selected, low and high frequencies sound are boosted to produce a
4Exit from the setting.
Storing your own sound modes 
You can adjust the sound modes and store your own adjustments in memory.
•When
appears on the display, you can move back to the previous display by pressing number button 3.
1Follow steps 1 and 2 on the left column.
• In step 2, select “EQ.”
2Select a sound mode.
To display the rest
3Select a frequency range.
4Adjust the sound elements of the selected frequency range.
1 Use 5/ ∞to adjust the level.
2 Press number button 2 (
), then turn
the control dial to select the frequency.
3 Press number button 2 (
), then turn the control dial to select the band width.
30