JVC KD-BT11 AUDIO), 2Select a number, 4Confirm the entry, 1Select “DELETE PAIR.”, 2Select a device you want, Deleting a registered device

1Move to the next (or previous) number position.2Select a number.3Repeat steps 1and 2until you finish entering a PIN code.4Confirm the entry.

5Operate the target Bluetooth device, (while “WAIT PAIR” is flashing on the display).

On the device to be connected, enter the same PIN code you have just entered for this unit. “PAIRING” flashes, then “PAIRING OK” appears on the display when the connection is established. Now you can use the device through the unit.

The device remains registered even after you disconnect the device. Use “CNNCT PHONE” or “CNNCT AUDIO” (or activate “AUTO CNNCT”) to connect the same device from next time on. (See the following and page 26.)

Deleting a registered devicePerform steps 1 and 2 on page 10, then...1Select “DELETE PAIR.”2Select a device you want to delete, then select “YES.”

Connecting a registered device (PHONE/AUDIO)

Perform steps 1 and 2 on page 10, then...	ENGLISH
1 Select “CNNCT PHONE” or “CNNCT AUDIO.”

2Select a device you want.

“CONNECTING” flashes, then “CONNECTED” appears on the display when the device is connected.

You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “AUTO CNNCT” on page 26.)

Disconnecting a device (PHONE/AUDIO)Perform steps 1 and 2 on page 10, then...Select “DISCN PHONE” or “DISCN AUDIO.”“DISCONNECT” appears on the display.

OPERATIONS 11