JVC KD-BT11 Adjusting the sound, MID, TRE, Fix, Sound, 60 Hz, 80 Hz, –06to, –06to, –06to, SUB.W, 500 Hz, 100 Hz, 200 Hz, VOLUME, 1.0 kHz, 1.5 kHz, 2.5 kHz, FADER*2

ENGLISH

3Adjust the quality slope (Q).

Sound	Range/selectable items
elements	BASS	MID	TRE
Frequency	60 Hz	500 Hz	10.0 kHz
	80 Hz	1.0 kHz	12.5 kHz
	100 Hz	1.5 kHz	15.0 kHz
	200 Hz	2.5 kHz	17.5 kHz
Level (LVL)	–06 to	–06 to	–06 to
	+06	+06	+06
Q	Q1.0	Q0.5	Fix
	Q1.25	Q0.75
	Q1.5	Q1.0
	Q2.0	Q1.25

BASS: Bass MID: Mid-range TRE: Treble5Repeat steps 3 and 4 to adjust other sound tones.

The adjustment made will be stored automatically.

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

2

FADER*2	R06 to F06
Adjust the front and rear speaker
balance.
BALANCE*3	L06 to R06
Adjust the left and right speaker
balance.
LOUD*4 (loudness)	LOUD ON or
Boost low and high frequencies to	LOUD OFF
produce a well-balanced sound at a
low volume level.
SUB.W*1 (subwoofer)	00 to 08,
Adjust the subwoofer output level.	initial: 04
VOL ADJ (volume adjust)	–05 to +05,
Adjust the volume level of each source	initial: 00
(except FM), compared to the FM
volume level. The volume level will
automatically increase or decrease
when you change the source.

•Before making an adjustment, select the source you want to adjust.

VOLUME	00 to 50 or
Adjust the volume.	00 to 30*5

*1 Displayed only when “L/O MODE” is set to “SUB.W” (see page 24).*2 If you are using a two-speaker system, set the fader level to “00.”

*3 This adjustment will not affect the subwoofer output. *4 Loudness setting will be applied to all sound modes. *5 Depending on the amplifier gain control setting. (See

page 25 for details.)

22