JVC KD-BT11 device, Symptoms, recorded, Bluetooth, controlled, player again, Remedies/Causes, MP3/WMA playback, Bluetooth device, Bluetooth device, signal reception

ENGLISH MP3/WMA playback

Bluetooth

Symptoms	Remedies/Causes
• Tracks do not play back in the order you	The playback order is determined when the files are
have intended them to play.	recorded.
• The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by
	how the tracks are recorded on the disc.
• The correct characters are not displayed	This unit can only display letters (upper case), numbers,
(e.g. album name).	and a limited number of symbols.
• The unit cannot be detected by the	• Search from the Bluetooth device again.
Bluetooth device.	• Reset the unit. When “WAIT PAIR” appears on the
	display, search from the Bluetooth device again.
• The unit does not make pairing with the	Enter the same PIN code for both the unit and target
Bluetooth device.	device.
• Phone sound quality is poor.	• Reduce the distance between the unit and the
	Bluetooth cellular phone.
	• Move the car to a place where you can get a better
	signal reception.
• The sound is interrupted or skipped during	• Reduce the distance between the unit and the
playback of a Bluetooth audio player.	Bluetooth audio player.
	• Disconnect the device connected for “PHONE.”
	• Turn off, then turn on the unit.
	• When the sound is not yet restored: Connect the
	player again.
• The connected audio player cannot be	• Check whether the connected audio player supports
controlled.	AVRCP (Audio Video Remote Control Profile).
	(Operations depend on the connected audio player.)
	• Disconnect and connect the Bluetooth player again.
• The unit does not response when you tried	You may have tried to copy the same entries (as stored)
to copy the phone book to the unit.	to the unit. Press 5to exit.

32