4Enter a PIN (Personal Identification Number) code to the unit.

•You can enter any number you like (1-digit to 16-digit number). [Initial: 0000]

•To enter a PIN code less than 4-digit, firstly delete the initial PIN code (0000) by pressing

number button 5 ().

*Some devices have their own PIN code. Enter the specified PIN code to the unit.

1Move to the next (or previous) number position.

2Select a number.

3Repeat steps 1and 2until you finish entering a PIN code.

4Confirm the entry.

5Operate the target Bluetooth device, (while “Open...” is flashing on the display).

On the device to be connected, enter the same PIN code you have just entered for this unit. “Connecting...” flashes, then “Pairing Ok” or “Connected [Device Name]” appears on the display when the connection is established. Now you can use the device through the unit.

appears when the connection is established.

The device remains registered even after you disconnect the device. Use “Cnnct Phone” or “Cnnct Audio” (or activate “Auto Cnnct”) to connect the same device from next time on. (See the following and pages 36 and 37.)

Deleting a registered device

Perform steps 1 and 2 on page 16, then...

1Select “Del Pairing.”

2Select a device you want to delete.

3Delete the selection.

•Press number button 3 to select “No” or return to step 1.

Connecting a registered device

Perform steps 1 and 2 on page 16, then...

1Select “Cnnct Phone” or “Cnnct Audio.”

2Select a device you want.

“Connecting...” flashes, then “Connected (and device name)” appears on the display when the device is connected.

Continued on the next page

ENGLISH

OPERATIONS 17