JVC KD-BT22 Bluetooth settings, 4Select a color, 3Select a source, Select “Settings.”, 2Select “Settings.”, Exit from the setting, 6Exit from the setting

ENGLISH

3Select a source.

All Source*1 ÔCD ÔChanger*3 (or Ext In*2) ÔUSB*3 ÔFM ÔAM Ô DAB *3 ÔiPod*3 ÔAux In ÔBT Audio

Ô(back to the beginning)

*1 When you select “All Source,” you can use the same color for all the sources.

*2 Depends on the “Ext Input” setting, see page 34. *3 Displayed only when the target component is

connected.

4Select a color.

Pale ÔAqua ÔSky ÔSea ÔLeaves ÔGrass ÔApple ÔRose ÔAmber Ô Honey ÔViolet ÔGrape ÔEvery*4 Ô User*5 Ô(back to the beginning)

*4 The color changes every 2 seconds.

*5 The user-edited colors—“Day Color” and “NightColor” will be applied (see the right column for details).

5Repeat steps 3 and 4 to select the color for each source (except when selecting “All Source” in step 3).

6Exit from the setting.Creating your own color—User Color

You can create your own colors—“Day Color” or “NightColor.”

1Follow steps 1 to 3 on page 32.

•In step 2, select “COLOR.”

•In step 3, select “Color Set.”

2Select “Day Color” or “NightColor.”3Select a primary color.4Adjust the level (00 to 11) of the selected primary color.5Repeat steps 3 and 4 to adjust other primary colors.

6Exit from the setting.

Bluetooth settings

You can change the settings listed on page 37 according to your preference.

•When is shown on the display, you can move back to the previous screen by pressing number button 3.

1

2Select “Settings.”

36