Using the remote controller (RM-RK50) 
Installing the lithium coin battery (CR2025)
Caution:
Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
If the effectiveness of the remote controller decreases, replace the battery.
Before using the remote controller:
•Aim the remote controller directly at the remote sensor on the unit.
•DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).
Remote sensor
Warning (to prevent accidents and damage):
•Do not install any battery other than CR2025 or its equivalent.
•Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.
•Store the battery in a place where children cannot reach.
•Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.
•Do not leave the battery with other metallic materials.
•Do not poke the battery with tweezers or similar tools.
•Wrap the battery with tape and insulate when throwing away or saving it.
1• Turns the power on if pressed briefly or attenuates the sound when the power is on.
•Turns the power off if pressed and held.
•Switches the conversation media during a phone
call conversation.
2• Changes the FM/AM/DAB bands with 5U.
•Changes the preset stations (or DAB services) with D ∞.
•Changes the folder of the MP3/WMA/AAC/WAV.
•While playing an MP3 disc on an
–Changes the disc if pressed briefly.
–Changes the folder if pressed and held.
•While listening to an Apple iPod: Connected to
–Pauses or resumes playback with D ∞.
–Enters the main menu with 5U.
(Now 5U/D ∞/2R/F 3work as the menu
selecting buttons.)*
*5U : Returns to the previous menu.
D ∞: Confirms the selection.
Connected to the USB cable:
–Enter the main menu if pressed and held.
–Select the desired menu if pressed briefly.
–Fast skip in every layer of the main menu if pressed and held.
3Adjusts the volume level.
4Selects the sound mode (iEQ: intelligent equalizer).
5 Selects the source.
Continued on the next page
ENGLISH
OPERATIONS 7