JVC KD-BT22 Adjusting the sound, Loudness, B Subwoofer, D VolAdjust, [–5to +5], 4 Exit from the setting, A Fad/Bal (Fader/Balance), C Hi Pass (Hi Pass Filter)

ENGLISH

		Adjusting the sound				4 Press number button 1 (			) to
You can adjust the sound characteristics to your							move to another setting level.
							4 /¢ : select the quality of
preference.
							LPF. [–12dB/oct or –24dB/oct]
• When				is shown on the display, you can
							Control dial: Turn the control dial to select
	move back to the previous screen by pressing number
							the subwoofer phase. [0deg (normal) or
	button 3 or 6.
							180deg (reverse)]
1
						* If “Off” is selected in step 2, you can only
							adjust the subwoofer phase.
2						C Hi Pass (Hi Pass Filter)
						Turn the control dial to select the cutoff
						frequency to the front/rear speakers. Set this
						to match the LPF setting.
						•	Off:	All signals are sent to the front/rear
								speakers.
	• For “EQ” setting, see page 29.					•	62Hz:	Frequencies lower than 62 Hz are
								cut off.
3 Adjust the selected setting item.						•	95Hz:	Frequencies lower than 95 Hz are
								cut off.
		A Fad/Bal (Fader/Balance)
						• 135Hz: Frequencies lower than 135 Hz are
1			Press number button 1 (		)
								cut off.
			to move to the “Fad/Bal” adjustment
						D VolAdjust, [–5 to +5]
			display.
						Turn the control dial to adjust the input level
2			Adjust the speaker output balance by
						of each source (except FM).
			pressing:
						Adjust to match the input level of the FM
			5/ ∞: between the front and rear
						sound level.
			speakers. [F6 to R6]
						• Before making an adjustment, select the
			4 /¢ : between the left and
							source you want to adjust.
			right speakers. [L6 to R6]
						E Loudness, [Off or On]
		B Subwoofer
						Turn the control dial to select “Off” or
1			Press number button 1 (		) to
						“On.” When “On” is selected, low and high
			move to the “Subwoofer” adjustment
						frequencies sound are boosted to produce a
			display.
						well-balanced sound at low volume level.
2			Use 4 /¢ to select a cutoff
			frequency to the subwoofer.			4 Exit from the setting.
			• Off*: All signals are sent to the

subwoofer.

• 55Hz: Frequencies higher than 55 Hz are cut off.

•85Hz: Frequencies higher than 85 Hz are cut off.

•120Hz: Frequencies higher than 120 Hz are cut off.

3Turn the control dial to adjust the subwoofer output level. [0 to 8]

30