JVC KD-DV4401, KD-DV4402 Activating/deactivating TA/PTY Standby Reception, Tracing the same programme—Network-TrackingReception, Automatic station selection—ProgrammeSearch, Press

ENGLISH

Activating/deactivating TA/PTY Standby Reception

TA Standby Reception		Indicator	PTY Standby Reception	Indicator
Press	to activate.		See page 25.
The unit temporarily will switch to Traffic		Lights up	The unit temporarily will switch to your	Lights up
Announcement (TA), if available, from any			favorite PTY programme from any source
source other than AM.			other than AM.
The volume changes to the preset TA
volume level if the current level is lower
than the preset level (see page 25).
Not yet activated. Tune in to another		Flashes	Not yet activated. Tune in to another	Flashes
station providing the RDS signals.			station providing the RDS signals.
Press	to deactivate.	Goes off	Select “OFF” for the PTY code (see page 25)	Goes off
			to deactivate.

Tracing the same programme—Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration on the right).

When shipped from the factory, Network-Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 25.

Programme A broadcasting on different frequency areas (01 – 05)

Automatic station selection—Programme Search

Usually when you press the number buttons, the preset station is tuned in.

If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting.

•The unit takes some time to tune in to another station using programme search.•See also page 25.

12