•This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for the MP3/WMA/WAV files.

•This unit can display only one-byte characters. No other characters can be correctly displayed.

•This unit can play back files recorded in VBR (variable bit rate).

Files recorded in VBR have a discrepancy in elapsed time indication.

•This unit cannot play back the following files:

–MP3 files encoded with MP3i and MP3 PRO format.

–MP3 files encoded with Layer 1/2.–WMA files encoded with lossless, professional, and voice format.–WMA files which are not based upon Windows Media® Audio.–WMA files copy-protected with DRM.

–Files which have the data such as ATRAC3, etc.

–AAC files and OGG files.Playing DivX files

•This unit can play back DivX files with the extension code <.divx>, <.div>, <.avi> (regardless of the letter case—upper/lower).

•This unit supports DivX Media Format files, <.divx> or <.avi>.

•This unit can display a unique registration code— DivX Video-on-Demand (VOD—a kind of Digital Rights Management). For activation and more details, visit <www.divx.com/vod>.

•Audio stream should conform to MP3 or Dolby Digital.

•This unit does not support GMC (Global Motion Compression).

•The file encoded in the interlaced scanning mode may not be played back correctly.

•This unit cannot play back the following files:

–Files encoded in Codec (Compressor-decompressor) other than DivX Codec.

•If you want to know more about DivX, visit <http://www.divx.com>.

Playing MPEG Video files

• This unit can play back MPEG Video files with the

ENGLISH

extension code <.mpg>, <.mpeg>, or <.mod>*.

 

* <.mod> is an extension code used for the MPEG-2 files

 

recorded by JVC Everio camcorders.

 

• Audio stream should conform to MPEG1 Audio

 

Layer 2.

 

• This unit cannot playback the following files:

 

– WMV (Windows Media Video) files

 

– RM (Real Media) format files

 

Changing the source

•If you change the source, playback also stops (without ejecting the disc).

Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously.

General settings—PSM

•If you change the “AMP GAIN” setting from “HIGH POWER” to “LOW POWER” while the volume level is set higher than “VOLUME 30,” the unit automatically changes the volume level to “VOLUME 30.”

Disc setup menu

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some discs.

Continued on the next page

REFERENCES 29