JVC KD-DV4401, KD-DV4402 Operations using the on-screenbar, (twice), 2Select an item, Ex.: Time search, 3Make a selection, If pop-upmenu appears, Entering time/numbers

ENGLISH

Using menu driven features... (DVD-Video/ DVD-VR)

1Press TOP M/MENU to enter the menu screen.

2 Press %/fi/@/#to select an item you want to start play.

3 Press ENT (enter) to confirm.

Canceling the PBC playback... (VCD)

1During stop, press DIRECT while holding SHIFT.

2 Hold SHIFT, then press the number buttons (0 – 9) to enter the desired number.

3 Press ENT (enter) to confirm.

• To resume PBC, press TOP M/MENU.

Operations using the on-screen bar

(DVD/DVD-VR/DivX/MPEG Video/VCD)These operations are possible on the monitor using the remote controller.1Show the on-screen bar (see page 19). (twice)2Select an item.3Make a selection.If pop-up menu appears...•To cancel pop-up menu, press RETURN.

•For entering time/numbers, see the following.

Entering time/numbersPress %/fito change the number, then press @/#to move to the next entry.•Each time you press %/fi, the number increases/ decreases by one value.•After entering the numbers, press ENT (enter).

•It is not required to enter the zero and tailing zeros (the last two digits in the example below).

Ex.: Time searchDVD: _:_ _:_ _ (Ex.: 1:02:00)

Press %once, then #twice to go to the third entry, % twice, then press ENT (enter).

To remove the on-screen bar

18