JVC KD-DV4401, KD-DV4402 General settings — PSM, OFF, Item, DEMO, 00 –, AUTO, DEMO ON, Display, 24H/12H, 24 HOUR, 12 HOUR, DEMO OFF, CLOCK ON, : Cancels, CLOCK MIN, : Cancels

ENGLISH

General settings — PSM

You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25.

1Enter the PSM settings.2Select a PSM item.

3Select or adjust the selected PSM item.4Repeat steps 2 and 3 to adjust other PSM items if necessary.5Finish the procedure.

Indications	Item			Setting, [reference page]
	(		: Initial)
DEMO	•	DEMO ON		: The display demonstration will be activated automatically if no
Display				operation is done for about 20 seconds, [5].
demonstration	•	DEMO OFF		: Cancels.
CLOCK DISP*1	•	CLOCK ON		: The clock time is shown on the display at all times when the power is
Clock display				turned off.

•CLOCK OFF : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [5].

CLOCK HOUR	0 – 23 (1-12)		[Initial: 0 (0:00)], [5].
Hour adjustment
CLOCK MIN	00 – 59		[Initial: 00 (0:00)], [5].
Minute adjustment
24H/12H	•	24 HOUR	: See also page 5 for setting.
Time display mode	•	12 HOUR
CLOCK ADJ *2	•	AUTO	: The built-in clock is automatically adjusted using the CT (clock time)
Clock adjustment			data in the RDS signal.
	•	OFF	: Cancels.

24