JVC KD-DV6102 manual Playing a DVD-R/DVD-RW or CD-R/ CD-RW, Playing an MP3/WMA disc

ENGLISH

Playing a DVD-R/DVD-RW or CD-R/ CD-RW

•Use only “finalized” discs.

•This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

•Only for CD-R/CD-RW: This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some DVD-R/DVD-RW or CD-R/CD-RW may not play back on this receiver because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation occurs on the lens inside the receiver.

–The pickup lens inside the receiver is dirty.

–CD-R/CD-RW on which the files are written with “Packet Write” method.

–DVD-R/DVD-RW which are not written in UDF-Bridge Format (eg. UDF format or ISO format).

–There are improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.).

•DVD-RW/CD-RW may require a longer readout time since the reflectance of DVD- RW/CD-RW is lower than that of regular discs.

•Do not use the following DVD-R/DVD-RW or CD-R/CD-RW:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.

Playing an MP3/WMA disc

•This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower) recorded in either CD-R/CD-RW or in DVD-R/DVD-RW.

•This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and WMA files.

•This receiver can display only one-byte characters. No other characters can be correctly displayed.

•This receiver can play back MP3/WMA files meeting the conditions below:

–Bit rate: MP3: 32 kbps — 320 kbps WMA: 32 kbps — 192 kbps

–Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) 48 kHz, 44.1 kHz, 32 kHz (for WMA)

–Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows long file name

•The maximum number of characters for file/ folder names vary among the disc format used (includes 4 extension characters—<.mp3> or <.wma>).

–ISO 9660 Level 1: up to 12 characters

–ISO 9660 Level 2: up to 31 characters

–Romeo: up to 128 characters

–Joliet: up to 64 characters

–Windows long file name: up to 128 characters

54