Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. See also page 27.
•JVC SIRIUS radio
•XMDirect™ Universal Tuner
•Refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Satellite radio.
GCI (Global Control Information) update
•If channels are updated after subscription, updating starts automatically.
The following appears and no sound can be heard:
–For SIRIUS Satellite radio: ”Channels Updating XX%* Completed”
–For XM Satellite radio: “UPDATING”
•Update takes a few minutes to complete.
•During update, you cannot operate your satellite radio.
*Changes every 20% of update is completion (ex. 20%, 40%, 60%)
Activate your SIRIUS subscription after connection1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset channel, CH184.
4Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS
Activate your XM subscription after connection
•Only Channel 0, 1, and 247 are available before activation.
1
2
XMDirect™ Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically.
3Check your XM Satellite radio ID labelled on the casing of the XMDirect™ Universal Tuner
Box, or tune in to “Channel 0” (see page 22).
4Contact XM Satellite radio on the internet at <http://xmradio.com/activation/> to activate your subscription, or you can call
Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).
ENGLISH
Continued on the next page
EXTERNAL DEVICES 21