
| Symptom | Remedy/Cause | |
|
|
| |
| • Elapsed playing time is not correct. | This occurs sometimes during play. This is caused by how | |
|
| the tracks are recorded on the disc. | |
MP3/WMA | • “Please Eject” appears on the display. | Insert a disc that contains MP3/WMA tracks. | |
• “Not Support” appears on the display and | Skip to the next track encoded in an appropriate format or | ||
| |||
| track skips. | to the next | |
| • Correct characters are not displayed (e.g. | This unit can only display letters (capital: A – Z, | |
| album name). | small: a – z), numbers, and a limited number of symbols | |
|
| (see page 37). | |
| • Bluetooth device does not detect the unit. | The unit can be connected with one Bluetooth cellular | |
|
| phone and one Bluetooth audio device at a time. | |
|
| While connecting a device, this unit cannot be detected | |
|
| from another device. Disconnect currently connected | |
|
| device and search again. | |
| • The unit does not detect the Bluetooth device. | • Check the Bluetooth setting of the device. | |
|
| • Search from the Bluetooth device. After the device | |
|
| detects the unit, select “Open...” on the unit to connect | |
|
| the device. (See page 13.) | |
| • The unit does not make pairing with the | • Enter the same PIN code for both the unit and target | |
| Bluetooth device. | device. If the PIN code of the device is not indicated on | |
|
| its instructions, try “0000” or “1234.” | |
* |
| • Select the device name from “Special Device,” then try to | |
Bluetooth |
| ||
| connect again. (See page 15.) | ||
|
| ||
| • Echo or noise occurs. | Adjust the microphone unit position. | |
| • Phone sound quality is poor. | • Reduce the distance between the unit and the Bluetooth | |
|
| audio device. | |
|
| • Move the car to a place where you can get a better signal | |
|
| reception. | |
| • The sound is interrupted or skipped during | • Reduce the distance between the unit and the Bluetooth | |
| playback of a Bluetooth audio device. | audio device. | |
|
| • Disconnect the device connected for “Bluetooth Phone.” | |
|
| • Turn off, then turn on the unit. | |
|
| • (When the sound is not yet restored,) connect the device | |
|
| again. | |
| • The connected audio device cannot be | Check whether the connected audio device supports AVRCP | |
| controlled. | (Audio Video Remote Control Profile). | |
|
|
|
*For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Continued on the next page
ENGLISH
REFERENCES 43