*1 When you select “All Source,” you can use the same color for all the sources.
*2 Depends on the “Ext Input” setting, see page 33. *3 Displayed only when the target component is
connected.
4Select a color.Every*4 ÔAqua ÔSky ÔSea ÔLeavesÔGrass ÔApple ÔRose ÔAmber ÔHoney ÔViolet ÔGrape ÔPale ÔUser*5 Ô(back to the beginning)
*4 The color changes every 2 seconds.
*5 The
5Repeat steps 3 and 4 to select the color for each source (except when selecting “All Source” in step 3).
6Exit from the setting.Creating your own color—User Color
You can create your own
•In step 2, select “COLOR.”
•In step 3, select “Color Set.”
2Select “Day Color” or “NightColor.”3Select a primary color.4Adjust the level (+00 to +11) of the selected primary color.
5Repeat steps 3 and 4 to adjust other primary colors.6Exit from the setting.
ENGLISH
SETTINGS 35