ENGLISH
Playing MP3/WMA/AAC/WAV tracks from a USB device
•Connecting a USB device automatically changes the source to “USB.”
•While playing from a USB device, the playback order may differ from other players.
•This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.
•When connecting a USB mass storage class device, refer also to its instructions.
•Connect one USB mass storage class device to the unit at a time. Do not use a USB hub.
•You can connect two types of USB device to this
•This unit is compatible with the USB
•If the connected USB device does not have the correct files, “NO FILE” appears.
•This unit can show ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 and show WMA/AAC/WAV Tag.
•This unit can play back MP3/WMA/AAC/WAV files meeting the conditions below:
MP3:
–Bit rate: 8 kbps — 320 kbps
–Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for
24 kHz, 22.05 kHz, 16 kHz (for
–Bit rate: 5 kbps — 320 kbps
–Sampling frequency: 8 kHz — 48 kHz
–Channel: Mono/stereo
AAC:
–Bit rate: 16 kbps — 320 kbps
–Sampling frequency: 48 kHz — 44.1 kHz
–Channel: 1 ch/2 ch
WAV:
–Bit rate: Linear PCM at 705 kbps and 1 411 kbps
–Sampling frequency: 44.1 kHz
–Channel: 1 ch/2 ch
•This unit can play back MP3 files recorded in VBR (variable bit rate).
•The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/ WMA/AAC/WAV Tag.
•This unit can recognize a total of 50 000 files and 5 000 folders (999 files per folder). However, the display can shows until 9 999 folders/files.
•The unit cannot recognize a USB mass storage class device whose rating is other than 5 V and does not exceed 500 mA.
•This unit may not recognized a USB device connected through a USB card reader.
•This unit may not play back files in a USB device properly when using a USB extension cord.
•This unit cannot assure proper functions or supply power to all types of USB devices.
•This unit cannot play back the following files:
–MP3 files encoded with MP3i and MP3 PRO format.
–MP3 files encoded in an inappropriate format.
–MP3 files encoded with Layer 1/2.
–WMA files encoded with lossless, professional, and voice format.
–WMA files which are not based upon Windows Media® Audio.
–AAC files created by any other application than iTunes.
–AAC files encoded with Apple lossless format.
–WAV files encoded using
–Files which have the data such as AIFF, ATRAC3, etc.
Changing the source
•If you change the source, playback also stops.
Next time you select the same source again, playback starts from where it has been stopped previously.
32
