ENGLISH
| Symptom | Remedy/Cause | |
|
|
| |
| • Bluetooth device does not detect the unit. | The unit can be connected with one Bluetooth cellular | |
|
| phone and one Bluetooth audio device at a time. | |
|
| While connecting a device, this unit cannot be detected | |
|
| from another device. Disconnect currently connected | |
|
| device and search again. | |
|
|
| |
| • The unit does not detect the Bluetooth device. | • Check the Bluetooth setting of the device. | |
|
| • Search from the Bluetooth device. After the device | |
|
| detects the unit, select “OPEN” on the unit to connect | |
|
| the device. (See page 14.) | |
|
|
| |
| • The unit does not make pairing with the | • Enter the same PIN code for both the unit and target | |
| Bluetooth device. | device. | |
* |
| • Select the device name from “SPECIAL,” then try to | |
| connect again. (See page 15.) | ||
Bluetooth |
| ||
|
| ||
• Echo or noise occurs. | Adjust the microphone unit position. | ||
| |||
|
|
| |
| • Phone sound quality is poor. | • Reduce the distance between the unit and the | |
|
| Bluetooth audio device. | |
|
| • Move the car to a place where you can get a better | |
|
| signal reception. | |
|
|
| |
| • The sound is interrupted or skipped during | • Reduce the distance between the unit and the | |
| playback of a Bluetooth audio device. | Bluetooth audio device. | |
|
| • Disconnect the device connected for | |
|
| • Turn off, then turn on the unit. | |
|
| • (When the sound is not yet restored,) connect the | |
|
| device again. | |
|
|
| |
| • The connected audio device cannot be | Check whether the connected audio device supports | |
| controlled. | AVRCP (Audio Video Remote Control Profile). | |
|
|
| |
| • “NO DISC” appears on the display. | Insert a disc into the magazine. | |
|
|
| |
changer | • “NO MAG” appears on the display. | Insert the magazine. | |
|
| ||
• “RESET 8” appears on the display. | Connect this unit and the CD changer correctly and press | ||
| |||
CD |
| the reset button of the CD changer. | |
|
| ||
• “RESET 1” – “RESET 7” appears on the display. | Press the reset button of the CD changer. | ||
| |||
|
|
| |
| • The CD changer does not work at all. | Reset the unit (see page 2). | |
|
|
|
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
36