JVC KD-G814 manual Adjusting the sound, To do, Range, Indication

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

2

Indication pattern changes as you adjust the fader or balance.

Ex.: When “FAD” is selected

Indication	To do:	Range
FAD*1	Adjust the front	R06
(fader)	and rear speaker	(Rear only)
	balance.	to
		F06
		(Front only)
BAL	Adjust the left	L06
(balance)	and right speaker	(Left only)
	balance.	to
		R06
		(Right only)
LOUD	Boost low and	LOUD ON
(loudness)	high frequencies
	to produce a	LOUD OFF
	well-balanced
	sound at low
	volume level.
WOOFER*2	Adjust the	00 (min.)
	subwoofer	to
	output level.	08 (max.)
VOL*3	Adjust the	00 (min.)
(volume)	volume.	to
		30 or 50
		(max.)*4

*1 If you are using a two-speaker system, set the fader level to “00.”

*2 This takes effect only when a subwoofer is connected.

*3 Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level.

*4 Depending on the amplifier gain control setting. (See page 21 for details.)

18