JVC KD-LHX501, KD-LHX502 Standby Reception, Using TA Standby Reception, Using PTY Standby Reception, To activate TA Standby Reception:, To deactivate the TA Standby Reception:

ENGLISH

Using the Standby Reception

You can use two types of Standby Reception— TA Standby Reception and PTY Standby Reception.

Using TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

•If a station starts broadcasting a traffic announcement, “Traffic News” appears on the display, and this unit temporarily tunes in to the station. The volume changes to the preset TA volume level (see page 37).

To activate TA Standby Reception:

TP indicator (either lights up or flashes)

•If the TP indicator lights up, TA Standby Reception is activated.

•If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception).

To activate TA Standby Reception, tune in to another station providing these signals. When you tune in to such a station, the TP indicator stops flashing and remains lit. Now TA Standby Reception is activated.

To deactivate the TA Standby Reception:

The TP indicator goes off.

Using PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from any source other than AM.

To select your favorite PTY code for PTYStandby Reception

You can select your favorite programme type for PTY Standby Reception.

•When shipped from factory, PTY Standby Reception has been set to work for searching for “News” programmes.

1

2

The last selected item appears.

3

Select “TUNER.”

Now “PTY Stnby” setting appears.

4

Select a PTY code (see page 17).

5

Exit

14