To set the Traffic Announcement volume—TA Volume

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

To change the FM tuner selectivity—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To change the voice support system

—VSS

You can select either “Beep” or “Voice” for the voice support system (VSS).

•Voice: Guidance is announced in the language you have selected (see “To select the language for the VSS —Language” on the right column) when you operate the unit.

•Beep: A Beep sounds when you operate the unit.

To deactivate the VSS, select “Off” for “VSS

Level” (see below).

To adjust the VSS level—VSS Level

You can adjust the volume level of the VSS sounds.

•By selecting “Off,” you can deactivate the VSS.

To select the language for the VSS—Language

You can select the language for the voice support system—English, German (Deutsch), or French (Français).

•The indications on the display will also be shown in the selected language.

To select the external component to use—Ext Input

To use the external component connected to the CD changer jack as the playback source through this unit, you need to select which component to use.

•Changer: To use a JVC CD changer.

•Line In: To use any external component.

To select the telephone muting—Telephone

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “Muting1” or “Muting2,” whichever mutes the sounds from this unit. During telephone muting, disc play pauses.

•Muting1: Selects this if this setting can mute the sounds while using the cellular phone.

•Muting2: Selects this if this setting can mute the sounds while using the cellular phone.

•Off: Cancels the telephone muting.

To select the amplifier gain control— Amp Gain

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “Low PWR” to prevent them from being damaged.

•Low PWR: You can adjust the volume level

up to “Volume 30.”

•High PWR: You can adjust the volume level

up to “Volume 50.”

ENGLISH

37