Assigning names to the sources
You can assign names to station frequencies, CDs and the external component connected to the LINE IN plugs. After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of the characters |
Station frequencies | up to 12 characters (up to 50 station |
| frequencies including both FM and AM) |
CDs | up to 32 characters (up to 46 discs) |
External component | up to 12 characters |
Note:
you cannot assign a name to an MD.
7 | 2 |
4 |
|
5 | 3 |
1
Select a source or a station frequency you want to assign a name to.
2 | DISP | Press and hold SEL (Select) for more than 2 | |
| |||
| SEL | ||
|
| seconds while pressing DISP. | |
When you select a station | When you select the | When you select the external | |
frequency as the source: | CD as the source: | component connected to LINE IN | |
|
|
| as the source: |
Ex: preset channel 1 of the FM1 band is selected as the station frequency.
CONTINUED TO THE NEXT PAGE
ENGLISH
29
EN | 29 | 98.10.19, 6:52 PM |