JVC KD-MX3000 manual Select the character set you want while is flashing, Select a character

3

DISP

Select the character set you want while “ ” is flashing.

Each time you press the button, the character set changes as follows:

Capital letters Small letters

Numbers and symbols

4

Select a character.

About the available characters, see page 31.

5

	Move the cursor to the next (or previous)
SSM	character position.

6

Repeat steps 3 to 5 until you finish inputting the name.

7

SEL	Press the button while the last selected
	character is flashing.

The input name is stored in memory.

To erase the input characters

Insert spaces using the same procedure described above.

Note:

When you assign a name to the 47th disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)

30

EN 21-32 KD-MX3000 [J]/F 30 98.10.19, 6:52 PM