JVC KD-MX3000 Radio Basic Operations, Listening to the radio, Select the band FM1, FM2, FM3 or AM

RADIO BASIC OPERATIONS

Listening to the radio

When using this unit in an area other than North or South America:

You need to change the AM/ FM channel intervals. See “Changing the AM/FM channel intervals” on page 25.

2 1 SCAN/RND

1

FM/AM

Select the band (FM1, FM2, FM3 or AM).

You can select any one of FM1, FM2, and FM3 to listen to an FM station.

FM1 FM2 FM3 AM

	Selected band appears.
2	Start searching a station.
To search stations
of higher	When a station is received, searching stops.
frequencies.
SSM
To search stations
of lower
frequencies.

To stop searching before a station is received, press the same button you have pressed for searching.

To tune in a particular frequency without searching:

1 Press FM/AM repeatedly to select the band (FM or AM).

2 Press and hold ¢ or 4		untill “MANU” starts flashing on the display.
Now you can manually change the frequehcy while “MANU” is flashing.
3 Press ¢	or 4 repeatedly until the frequency you want is reached.

• If you hold down the button, the frequency keeps changing until you release the button.

Scanning broadcast stations

When you press SCAN/RND (Scan/Random) while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds ("SCAN" appears on the display), and you can check what program is now being broadcast.

If you want to listen to that program, press the same button again to stop scanning.

6

EN 06-09 KD-MX3000 [J]/F 6 98.10.19, 6:35 PM