Zebra Technologies P720 Plastic Card Printer, Dual-sided Lamination, Card Printer Solutions

Card

Printer

Solutions

P720 Plastic Card Printer

Dual-sided Lamination

General information Getting started Operation Printing a card Cleaning Troubleshooting Specifications Appendix A Appendix B Appendix C

38

A cleaning using the Cleaning System with cards usually suffices, moreover your printer is equipped with two cleaning rollers situated before the card enter the Laminator.

The upper roller has a coating that collects any loose particles on the surface of cards. However, a separate Laminator Station cleaning can remove more stubborn deposits.

To avoid deposits, only use foam-tipped swabs.

Never touch the rollers with fingers.

It is recommended to perform this cleaning function prior to daily operation or when laminator has been in “stand-by” mode due to high temperatures.

WHEN TO MAINTAIN

Cleaning frequency varies with different environments. Clean when lamination anomalies persist.

HOW TO MAINTAIN

1 • Switch OFF your printer and open cover.

2 • Unplug the two connectors “1”.

3 • Turn knob ”2” in the appropriate direction until you release the Top laminator bracket.

4 • Pull the Top laminator bracket and access the laminator rollers for cleaning withfoam-tipped swabs.

5 • Make sure the rollers are dry before Pushing down the braquet and switching on your printer.