Zebra Technologies specifications 2 2 Loading Printing Ribbons, P720 Plastic Card Printer

Card

Printer

Solutions

General information Getting started Operation Printing a card Cleaning Troubleshooting Specifications Appendix A Appendix B Appendix C

P720 Plastic Card Printer

Dual-sided Lamination

2 • 2 Loading Printing Ribbons

The P720 Printer requires approved ribbons (see Appendix C). The Resin Thermal Transfer and Dye Sublimation ribbons and Lamination are specifically designed for your P720 Printer. For optimum performance and printer life (Print Head), always use approved ribbons.

DO NOT TOUCH the print head or the electronic components on the print head carriage. Discharges of electrostatic charge from the human body or other surfaces can damage the print head or other electronic components used in this device.

1• Remove ribbon from packaging.

2• With printer power ON and Printer Ready status, open cover and press down on the Print Head Unlock Lever to open the print head carriage. The print head carriage will pop open.

3• Load ribbon onto the supply spindle “1”(under print head carriage) and empty core ( with tape attached) onto the take-up spindle “2”.

Make sure the ribbon comes off the top of the supply spindle and feeds to the top of the take-up spindle.

4• Push down on the Print Head Lock Lever until an audible “click” signals the locked-down position.

5• Close Cover.

14