Zebra Technologies 4 2 Cleaning Magnetic Encoder only, P720 Plastic Card Printer, How To Clean

Card

Printer

Solutions

P720 Plastic Card Printer

Dual-sided Lamination

General information Getting started Operation Printing a card Cleaning Troubleshooting

Specifications

Appendix A

Appendix B

Appendix C

A cleaning using the cleaning system with cards usually suffices. However, a separate Print head cleaning using swabs can remove more stubborn deposits when print anomalies persist. To avoid deposits, only use foam-tipped swabs.

1 • Switch power Off, open cover, raise Print Head and remove the Ribbon.

2 • Clean Print Head by moving alcohol-moistened swab tip side-to-side across Print Head elements. Only use moderate force.

Make sure the elements are dry before switching on. (To reorder swabs see Appendix C).

Never use a sharp object to scrape deposits from the print head. Permanent dama- ge will result.

4 • 2 Cleaning Magnetic Encoder only

WHEN TO CLEAN

When the LCD screen reports messages : “Cleaning Magnetic Endoder”

HOW TO CLEAN

•Leave power on.

Open Cover and release Print Head Bracket to remove ribbon.

Close Print Head Bracket

Close Cover. Remove cards from Card Feeder.

36

•Insert one abrasive Pre-Saturated Cleaning Card (provided) through slot on the side of the Card feeder Cover.

•Press the right panel button for a few seconds. The card will feed into printer and carry out the cleaning process. repeat the process with a new Cleaning card if necessary.