ENGLISH

Setup Menu (continued)

 

Menu items

Selectable settings

(Initial setting)

 

Installation

Select the angle of the unit measured by the supplied gauge. (See

 

Angle

also the Installation/Connection Manual.)

 

 

 

1: –5.0° to 1.0°

 

 

 

2: 1.0° to 6.0°

 

 

 

3: 6.0° to 14.0°

 

 

 

4: 14.0° to 32.0°

 

 

 

• It is not recommended to install the main unit at an angle of

 

 

more than 30˚; otherwise, the malfunction may result.

Setting

WAAS/EGNOS

Select whether to use WAAS and EGNOS to increase the accuracy

 

of positioning.

 

 

 

 

 

 

Off: Cancels.

 

System

 

On: Activates.

 

Language*4

Select the language used for on-screen information and voice

 

guidance.

English US, Español, Français

Reset Calibration Reset the calibration data in the following cases:

•When you reinstall the unit to another car.

•When you change Installation Angle.(☞above)

•When you replace or rotate the tires.

Once this is carried out, the learning data is cleared. Calibration starts when you exit from the menu. (☞[9])

Traffic

Subscribe to traffic services. ☞[41]

Subscription

 

Measuring Units

Select the measuring units for distance.

km / m, mi / ft

 

Coordinates

Select the measuring units for coordinate degrees.

Deg / Min / Sec, Deg / Milli / Micro

 

Car Position

If you find your current position displayed on a wrong place on the

map, use this setting to correct your position.

 

Adjust the position with 4¢5∞, then the direction with 5∞.

*4 This setting is shared with the Language setting in AV Menu (☞[90]).

46