ENGLISH

Initial settings

When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings.

Turn on the power.

Language

English USEspañolFrançais
Adjust the following settings.

Select an item

Proceed to the next setting

Back to the previous setting

1Language

Select the language you want for the display and the voice guidance.

2Store Display Mode

Select Off.

•If you select On, the System starts in the navigation demonstration mode for shops. (☞[47])

3Installation Angle

Select which angle your unit is installed at. This setting is necessary for the precise functioning of the Navigation System.

•See “Measuring the installation angle” on the Installation/Connection Manual.

4Time Zone

Select your residential area for clock adjustment.

5DST

Select Auto if your residential area is subject to DST (Daylight Saving Time).

6Reverse Polarization

Engage the parking brake, step on the brake pedal, then switch the gear lever. If Forward and Reverse alternates on the display, connection is correct. Select one of the alternatives (GND or Battery) that shows the gear position correctly.

Finish the procedure.

You can also change these settings (except Store Display Mode) through Setup Menu and AV Menu when necessary.

•Language ☞[46]•Installation Angle ☞[46]•Time Zone ☞[91]•DST ☞[91]•Reverse Polarization ☞[94]

8