JVC KD-S50 Using the Sound Control, Memory SCM, Recalling the sound modes, English, Preset values

Using the Sound Control	Recalling the sound modes
Memory (SCM)	When “SCM LINK” is set to “LINK ON,”
	select the source.

You can select and store a preset sound adjustment		Sound mode
suitable to each playback source. (Advanced SCM)
		indicator
Selecting and storing the sound modes	C D
	F M
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select	A M
the same source and will be shown on the display.
A sound mode can be stored for each of the	Each time you change the playback
following sources — FM1, FM2, FM3, AM, CD.
	source, the SCM indicator flashes
• If you do not want to store the sound mode	on the display.

separately for each playback source, but want
to use the same sound mode for all the sources,	Notes:
see “To cancel Advanced SCM” on page 15.
	•	You can adjust each sound mode to your preference,
Select the sound mode you want.		and store it in memory.
		If you want to adjust and store your original sound
• Each time you press the button, the sound mode
		mode, see “Storing your own sound adjustment” on
changes as follows.
		page 14.
SCM	•	To adjust the bass and treble reinforcement levels or

to turn on/off the loudness function temporarily, see page 12. (Your adjustments will be cancelled if another source is selected.)

•When “SCM LINK” is set to “LINK ON”, the selected sound mode can be stored in memory for the current source and the effect applies only to the current source. Each time you change the playback source, the SCM indicator flashes on the display.

•When “SCM LINK” is set to “LINK OFF”, the selected sound mode effect applies to any source.

Indication	For:	Preset values
		Bass	Treble	Loudness
BEAT	Rock or disco	+02	00	On
	music
SOFT	Quiet	+01	–03	Off
	background
	music
POP	Light music	+04	+01	Off
SCM OFF	(Flat sound)	00	00	On

ENGLISH

13