ENGLISH

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Call up the sound mode you want to adjust.

•See “Using the sound control memory” on page 19 for details.

SCM

3 Adjust the bass or treble level, or turn the loudness function ON/OFF.

•See page 18 for details.

Equalization pattern changes as you adjust the bass or treble.

Ex.: When you select “SOFT”

2 Select “BAS (bass)”, “TRE (treble)” or “LOUD (loudness)”.

Ex.: When you adjust “TRE (treble)”

4 Repeat steps 2 and 3 to adjust the other items.

5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.

SCM

Your adjustment made for the selected sound mode is stored in memory.

6 Repeat the same procedure to store other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the

preset values listed in the table on page 19.

20