| To cancel Advanced SCM – SCM LINK | To select the telephone muting – TEL |
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
•LINK ON: Advanced SCM (different sound modes for different sources).
•LINK OFF: Conventional SCM (one sound
mode for all sources).
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2 Press ¢
or 4 
to select “SCM LINK.”
3Turn the control dial to set to the desired indication (“LINK ON” or “LINK OFF”).
4Press SEL (select) to finish the setting.
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit.
When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute
| the sounds. |
• OFF: | Cancels the telephone muting. |
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2 Press ¢
or 4 
to select “TEL.”
3Turn the control dial to set to the desired indication (“MUTING 1”, “MUTING 2” or “OFF”).
4Press SEL (select) to finish the setting.
ENGLISH
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
•AUDIO 1: Level meter illuminates from bottom to top.
•AUDIO 2: Alternates level meter (moves from bottom to top) and
| illumination display. |
• OFF: | Erases the audio level indicator. |
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2 Press ¢
or 4 
to select “LEVEL.”
3Turn the control dial to set to the desired indication (“AUDIO 1”, “AUDIO 2” or “OFF”).
4Press SEL (select) to finish the setting.
23