Searching a station manually:

3 Tune in to a station you want while “M”

Manual search

is flashing.

1 Select the band (FM1 – 3, AM).

 

 

To tune in to stations of

 

 

 

 

higher frequencies.

 

 

 

ENGLISH

FM1 FM2 FM3

AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

To tune in to stations of lower frequencies.

•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.

2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.

Selected band appears.

When an FM stereo broadcast is hard to receive:

Press MO RND (monaural/random) while listening to an FM stereo broadcast.

•Each time you press the button, the MO indicator lights up and goes off alternately.

Lights up when receiving an FM broadcast in stereo.

MO

RND

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).

7