JVC KD-S73R Storing stations in memory, FM station automatic preset SSM, English, FM1 FM2 FM3

ENGLISH

3 Tune in to a station you want while “M” (manual) is flashing.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM—MW/LW) until you release the button.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

FM

When an FM stereo broadcast is hard to receive:

FM1 FM2 FM3

MODE

8MO

1 Press MODE to enter the	2 Press and hold both buttons for
functions mode while listening	more than 2 seconds.
to an FM stereo broadcast.
2 Press MO (monaural), while
still in the functions mode, so	SSM
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
MO (monaural) indicator
	“- -SSM- -” appears, then disappears
MO
	when automatic preset is over.

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons—No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

8