ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
•See “Using the sound control memory (SCM)” on page 21 for details.
SCM
Ex.: When you select “SOFT”
2 Select “BAS (bass)”, “TRE (treble)” or “LOUD (loudness)”.
S E L 
3 Adjust the bass or treble, or turn the loudness function ON/OFF.
• See page 20 for details.
4 Repeat steps 2 and 3 to adjust the other items.
5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM
Your adjustment made for the selected sound mode is stored in memory.
6 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.
22
