Selecting preset sound modes—EQ Storing your own sound modes

You can select a sound mode suitable to the music genre.

Available sound modes:•Hard Rock / R&B / Pop / Jazz / Dance / Country / Reggae / Classic•User 1 / User 2 / User 3

•Flat (To cancel the sound mode)

1 While playing any source...

 

The Main Menu appears on

MENU

the display.

2 Move the cursor to “EQ” on the Main Menu.

Cursor

3 Enter the EQ (equalizer) Menu.

OK

BAND

The currently selected mode appears (highlighted).

4 Select (highlight) one of the preset EQ modes.

EX.: When “Jazz” is selected.

To exit from the Menu operation, press

MENU again.

You can adjust the sound modes and store your own adjustments in memory.

1 Repeat steps 1 to 4 on the left column to select a sound mode you want to adjust, then...

OK

BAND

2 Make adjustments as you like.

1)Press 4() or ¢() to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

2)Press 5(up) or ∞(down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

3 Finish adjustment.

OK

BAND

4 Select (highlight) one of the user sound modes (User 1, User 2, or User 3) you want to store into.

OK

BAND

then

“Memory” appears for a while.

ENGLISH

For details about the preset settings of each sound mode, see page 62.

29