More about This Receiver

ENGLISH

Basic OperationsTurning off the power

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Tuner OperationsStoring stations in memory

•When SSM is carried out for a band...

–All stations previously stored for the band are erased and stations are stored newly.

–Received stations are preset in No.1 (lowest frequency) to No.6 (highest frequency). When SSM is over, the station stored in No.1 will be automatically tuned in.

•When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

FM RDS operations

•Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network- Tracking Reception will not operate.

•If Alternative Reception (for DAB: see page 56) is activated, Network-Tracking Reception is also activated (“AF”) automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception.

•TA Standby Reception and PTY Standby Reception will be temporarily canceled while listening to an AM station.

Basic Disc OperationsGeneral

•This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in both audio and MP3/WMA formats.

•The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track without the extension code <wma>.

•When a disc has been already loaded, selecting “CD” for the playback source starts disc play.

Inserting a disc

•When a disc is inserted upside down, the disc automatically ejects.

•If you keep the control panel open for about 1 minute, the control panel returns to its previous position.

Playing a disc

•While playing an audio CD: If a title has been assigned to the audio CD (see page 42), it will be shown on the display.

•While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds. (The elapsed playing time also changes intermittently on the display.)

59