ENGLISH

When playing a CD-R or CD-RW

•Use only “finalized” CD-Rs or CD-RWs.

•Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation on the lens inside the unit.

–The pickup lens inside the unit is dirty.

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

•Do not use following CD-Rs or CD-RWs:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs. For example,

–Stickers or labels may shrink and warp a disc.

–Stickers or labels may peel off so discs cannot be ejected.

–Print on discs may get sticky.

Read instructions or cautions about labels and printable discs carefully.

Changing the source

•If you change the source, playback also stops (without ejecting the disc).

Next time you select “CD” for the playback source, disc play starts from where it has been stopped previously.

ImageLink

•ImageLink will not work in the following cases:

–If no <jcl> file is included in an MP3/ WMA folder.

–If Intro Scan is activated.

–If the source is changed to another from “CD.”

•If more than one <jcl> file are included in a folder, a file with the youngest file number is used for the graphic screen.

Ejecting a disc

•If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)

Sound Adjustment—Daily UseSelecting the DSP modes—DSP

•Effectiveness of “V.Cancel” depends on the recording condition of the sources. Especially, if you play back the following sources you cannot get the satisfactory results.

–Monaural sources such as AM and monaural FM broadcasting programs,

–Multiplex sound sources, and

–Sources recorded with duets, strong echo, a chorus, or only a few instruments.

•If “V.Cancel” is selected, CCC, BBE, and preset sound modes (EQ) will not be adjusted (“Fix” appears on the display.)

•When “4ch” is selected, rear speakers are used only to reproduce reflections and reverberations in order to creates a being- there feeling in your car compartment.

•If fader or balance has been set close to its extreme, appropriate effect may not be obtained.

60