JVC KD-SV3104 KV-MR9010, D Connecting the monitor, E Connecting the external amplifier, AV1-IN

D Connecting the monitor

Before connecting the monitor, make sure the unit is turned off.

Video cord (not supplied) VIDEO OUT

AV1-IN

Or

AV2-INPUT

Rear side

KV-MR9010

9-INCH WIDESCREEN MONITOR (not supplied)

E Connecting the external amplifier

You can connect amplifier to upgrade your car stereo system.

•Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.

•Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.

Rear speakers

Remote lead Y-connector (not supplied for this unit)

JVC Amplifier

Remote lead (Blue with white stripe)

To the remote lead of other equipment or auto antenna if any

Signal cord (not supplied for this unit)

Front speakers

*3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.

F Connecting the external components

JVC CD changer

• Refer also to page 15 of the

INSTRUCTIONS.

JVC CD changer

*4 Connecting cord supplied for your CD changer

CAUTION :

• Before connecting the CD changer, make sure that the unit is turned off.

External component

Set external input to “EXT IN” (see page 24 of the INSTRUCTIONS).

Signal cord (not supplied for this unit)

KS-U57*5

Signal cord (not supplied for this unit)

LINE IN

External component

External component

CD changer jack

*5 Line Input Adapter KS-U57 (not supplied for this unit)

4