Getting Started

ENGLISH

Installation

Warning

Avoid installing the adapter unit and the microphone unit in the following places.

Where they would hinder your safety driving.

Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.

Where they would be subject to rain, water splashes or excessive humidity.

Where they would be subject to dust.

Where they would be positioned on an unstable place.

Where they could damage the car’s fittings.

Where radio wave interferes (EX.: trunk, etc.).

Mounting the adapter unit

Wipe clean the selected surface sufficiently, and affix the Velcro tape.

Interface adapter unit

Velcro tape (hard) (supplied)

Velcro tape (soft) (supplied)

If the Velcro tape (hard) adheres to the car mat directly, you may install this unit without using the Velcro tape (soft).

The serial number is printed on the label placed on the bottom of the unit. Do not cover up the label with the velcro tape.

6

Page 8
Image 8
JVC KS-BTA200 manual Getting Started, Installation, Mounting the adapter unit