OTHER MAIN FUNCTIONS
Setting the clock | To check the current clock time or change the | |
display mode | ||
|
You can also set the clock system to either 24 hours
or 12 hours.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 20.)
Press DISP repeatedly. Each time you press the
button, the display mode changes as follows:
•During tuner operation:
Clock 
Frequency
Notes:
*For the indication change during RDS operation, see page 12.
*For the indication change during DAB operation, see page 27.
ENGLISH
• During tape operation:
2 Set the hour.
1Select “CLOCK H” if not shown on the display.
2Adjust the hour.
1 2
3 Set the minute.
1Select “CLOCK M.”
2 Adjust the minute.
1 
2
4 Set the clock system.
1Select “24H/12H.”
2 Select “24H” or “12H.”
1 | 2 |
Play mode (tape direction) 
Clock
•During external component operation:
LINE IN 
Clock
•During CD changer operation:
Clock 
Elapsed playing time
Disc number
Changing the general settings (PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 20.)
5 Press SEL (select) to finish the setting.
To check the current clock time while the unit is turned off, press DISP (display).
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
2 Select the PSM item you want to adjust. (See page 20.)
CONTINUED ON THE NEXT PAGE
19
